Can Bitumen Adhesive Under Floor Tiles Contain Asbestos?

Yes, older floor tiles were often fixed in place using a black bitumen-based adhesive, sometimes referred to as bitumen mastic or black mastic. In some cases, this adhesive contained asbestos, particularly when found beneath older vinyl floor tiles.

In this article, I’ll explain why asbestos was used in bitumen adhesive, what the adhesive typically looks like, how to identify whether asbestos is present, and how asbestos floor tiles and bitumen adhesive are safely removed.

If you have old floor tiles or black bitumen adhesive that you suspect may contain asbestos, call Andrew at Removerr on 07434 691 809 or email andrew@removerr.co.uk for advice on asbestos removal and disposal in Northern Ireland.

Why Was Asbestos Added to Bitumen Adhesive?

Asbestos was added to some bitumen-based floor adhesives to improve the performance of the material. The fine asbestos fibres helped provide flexibility, while asbestos was also valued for its resistance to heat, moisture and general wear.

Where asbestos is present in bitumen adhesive, it is usually chrysotile, commonly known as white asbestos. Unlike asbestos cement products, which typically contain around 10–15% asbestos, bitumen floor adhesive can contain only a small or trace amount of chrysotile. The fibres are bound within the bitumen rather than being present as loose asbestos fibres.

This makes asbestos bitumen adhesive a relatively well-bonded material. However, the asbestos floor tiles laid on top of it may contain a considerably higher percentage of asbestos than the adhesive itself.

What Does Asbestos Bitumen Adhesive Look Like?

Bitumen floor adhesive normally appears as a black or very dark brown, tar-like material stuck to the surface of the floor. Depending on its age and condition, it may appear as a relatively smooth black coating or as patches of hardened adhesive left behind after the original floor tiles have been lifted.

One useful clue that old floor tiles were previously present is the pattern left behind in the adhesive. When individual tiles are lifted, their edges can leave a clearly visible square outline in the black bitumen. Older floor tiles were commonly around 9 × 9 inches (approximately 230 × 230 mm), although other sizes were also used.

Even if the majority of the tiles have previously been removed, you may still find pieces of the original flooring underneath skirting boards, baths or other areas that have remained undisturbed. You may also be able to see the outlines of the individual tiles across the black adhesive, as shown in the image below.

Finding evidence of old floor tiles together with black bitumen adhesive can indicate that asbestos may be present in the tiles, the adhesive, or both.

Can bitumen adhesive contain asbestos

Square outline left behind after the original floor tiles were removed.

When Was Asbestos Used in Floor Tile Adhesive in the UK?

Black bitumen floor adhesive containing asbestos was used beneath vinyl floor tiles in the UK up until around 1992. Other products containing chrysotile (white asbestos) continued to be used later into the 1990s, until the final UK ban on asbestos in 1999.

If you discover older vinyl floor tiles and black bitumen adhesive that are believed to date from before 1992, there is a greater possibility that asbestos could be present in the floor tiles, the adhesive, or both. An asbestos test is recommended to confirm whether asbestos is present before the flooring is disturbed or removed.

How Can You Tell if Bitumen Adhesive Contains Asbestos?

The only way to know for certain whether black bitumen adhesive contains asbestos is to have a representative sample analysed by an accredited asbestos laboratory. You cannot confirm the presence of asbestos simply from the colour or appearance of the adhesive.

Where old floor tiles and black bitumen adhesive are both present, they can be tested separately. This is important because asbestos may be present in the floor tile and the bitumen adhesive.

If you are in Northern Ireland and need a sample taken and tested, I recommend Safety Advice Centre in Bangor, Co Down, who can arrange asbestos sampling and analysis.

Does Asbestos Bitumen Adhesive Need to Be Removed?

Not necessarily. If asbestos-containing bitumen adhesive is firmly bonded to a solid floor, is in good condition and is unlikely to be disturbed, removing it may not be necessary. In many cases, it can be left in place and encapsulated beneath the new flooring.

For example, a suitable floor-levelling compound can provide a new surface over the old adhesive. Depending on the type of flooring being installed, other flooring systems may also effectively cover and encapsulate the bitumen adhesive. This avoids unnecessarily disturbing a material in which the asbestos fibres are already bound within the bitumen.

There are situations, however, where the bitumen adhesive will need to be removed. One example is during a renovation where the floor itself is being taken up. If asbestos-containing bitumen adhesive is stuck to chipboard or timber floorboards that are being removed, the boards will have asbestos-containing material attached to them and will need to be disposed of accordingly.

This was the situation on a bathroom floor that I removed. The old vinyl floor tiles had been laid using black bitumen adhesive over chipboard flooring. The chipboard had been badly damaged due to a water leak, and with a new extension being built at the rear of the property, the floor needed to be removed. The vinyl floor tiles and the chipboard flooring with the asbestos-containing bitumen adhesive still attached were therefore removed together and disposed of as asbestos waste.

Asbestos vinyl floor tiles and bitumen floor adhesive removal NI

Asbestos vinyl floor tiles removed along with bitumen adhesive stuck to damaged chipboard flooring

Asbestos Floor Tile and Adhesive Removal in Northern Ireland

If you need help with asbestos removal in Northern Ireland, Removerr provides removal, collection and disposal of a range of asbestos-containing materials, including asbestos floor tiles and flooring contaminated with asbestos-containing bitumen adhesive.

The cost will depend on the amount of flooring being removed and the work involved. You can find typical prices in my guide to the cost of getting rid of asbestos in Northern Ireland.

For advice or a quotation, call Andrew on 07434 691 809 or email andrew@removerr.co.uk. Photographs of the flooring and surrounding area are helpful, as they allow me to see what is involved and provide a more accurate quotation.